CROCK METER – DIGITAL MODEL is used to determine the Color Fastness against rubbing (Dry/Wet). 
With Pre-set Counter with LCD Display.One of the test for determination of colour fastness of dyed or printed textiles or leather is the crocking test.  This crock meter suppliers is used for the determination of colour fastness against rubbing, either under dry or under wet conditions.  In this test and moving brass finger of specified shape and size rubs against the test specimens under test and the amount of colour transferred to a piece of abradant fabric fixed over the base of the moving finger are graded with the help of standard grey scales to evaluate the colour fastness against rubbing.

The ‘VGOTECH’ Crock Meter Suppliers consists of a rigid flat metalic platform on which the test specimen can be held firmly and a abrading finger which rubs against it under a specified load.The platform is fixed over the base of the equipment and lies in a horizontal plane.The test specimen is held firmly over an abrasive paper which is pasted on the upper face of the platform, with the help of two pins holding it at both ends.

The abrading finger has a flat circular rubbing face which is covered with 4 piece of white abradant fabric during the test.  The abradant fabrics picks up colour lost by the test specimen during rubbing.  It is held over the finger with the help of a tapered ring.  Motion to the finger is given through a reciprocating arm with runs an two ball bearings to minimize friction and to apply a uniform load on the finger. The arm is moved by a manually operated crank and connecting link. 

The Crock Meter equipment is finished in dark metallic paint  and bright chrome plating to give it a corrosion resistant finish.

CROCK METER – DIGITAL MODEL is used to determine the Color Fastness against rubbing (Dry/Wet). 
With Pre-set Counter with LCD Display. 

 One of the test for determination of colour fastness of dyed or printed textiles or leather is the crocking test.  This test is used for the determination of colour fastness against rubbing, either under dry or under wet conditions.  In this test and moving brass finger of specified shape and size rubs against the test specimens under test and the amount of colour transferred to a piece of abradant fabric fixed over the base of the moving finger are graded with the help of standard grey scales to evaluate the colour fastness against rubbing.

The ‘VGOTECH’ Crockmeter consists of a rigid flat metalic platform on which the test specimen can be held firmly and a abrading finger which rubs against it under a specified load.  The platform is fixed over the base of the equipment and lies in a horizontal plane.  The test specimen is held firmly over an abrasive paper which is pasted on the upper face of the platform, with the help of two pins holding it at both ends.

The abrading finger has a flat circular rubbing face which is covered with 4 piece of white abradant fabric during the test.  The abradant fabrics picks up colour lost by the test specimen during rubbing.  It is held over the finger with the help of a tapered ring.  Motion to the finger is given through a reciprocating arm with runs an two ball bearings to minimize friction and to apply a uniform load on the finger. The arm is moved by a manually operated crank and connecting link.

The equipment is finished in dark metallic paint  and bright chrome plating to give it a corrosion resistant finish.

VGOTECH  WASHING FASTNESS TESTER (Launderometer) – is used to wash the fabric sample for various tests for determining color Fastness.

Fully SS Structure comprising of rotor moving at 40 rpm in water tank
Heating load-2 x 1.5 KW or 3 x 2.0kw
Drive-1/4 HP 40rpm Geared motor coupled with rotor shaft
Beakers made from SS 316 ERW Pipe of 3mm thickness Rotor tank, top & frame made from SS 304.
Digital TIC & Timer in Panel for controlling heating cycle.
Safety Provision–Limit switch stops the machine as soon as the top lid is lifted.

STANDARD MODELS:

a) 8 x 550ml

b) 4 x 1200ml + 4 x 550ml

c) 8 x 1200ml + 8 x 550ml

The Washing Fastness Tester is used for determining colour fastness of textile materials to washings.  This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap – soda solution.  Before being rinsing and dried.  The change in colour of specimen and stains of the adjacent fabrics are assessed with standard Grey Scale.

The ‘VGOTECH’ WASHING FASTNESS TESTER’ consists of a thermostatically controlled, electrically heated water bath made of Stainless Steel.  The bath is heated by means of immersion heaters and its temperature controlled by a capillary type thermostat.  The temperature of water inside the bath is displayed on a digital temperature indicator.  The bath has a double walled hinged lid made of stainless steel sheets.

 

The jars in which the test solution and the test specimens are kept during the test are made from stainless steel and are provided with rubber scales for water tight closing.  They are held in a cast aluminium rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating  about a horizontal axis with the help of a geared Motor.  A clockwork timer is provided to stop the motor after a pre-determined time. The apparatus is fabricated on a sturdy angle iron frame and is completely enclosed on all four sides with mild steel sheet duly enameled in metallic green paint.  The top of the apparatus is covered with stainless steel sheet.

One hundred stainless steel balls of 6 mm diameter are supplied with the apparatus as standard accessory for providing beating action during the washing operation.  Extra stainless steel balls and standard Grey Scales are available as optional accessory.

DIGITAL LIGHT FASTNESS TESTER

FIXED DRUM DIGITAL LIGHT FASTNESS TESTER – is used to determine the color fastness and degradation of textiles and dyed material against sunlight. This standard model comes with a 500 watt MBTL Fading lamp. 
Fixed Drum Type Comprising of : 
Specimen Holder – 4Nos. 
Test Tube Holders for Humidity Control – 50 Nos. 
Water Tank – 1No. 
Pump – 1No. 
Hour Meter with Buzzer – 1No. 
Voltage Stabilizer – 1No. 
Potassium Carbonate – 500gm (1 Box) Liquid Filler (Syringe) (There Is No Warranty On Mbtl Lamp)

VGOTECH Light Fastness Tester Suppliers is used for determination of Colour Fastness to light using a 500 W mercury Ballast Tungsten Filament Lamp & internally phosphor coated.  The equipment is suitable for all types of textiles except photocrometic coloured textiles.

PRINCIPLE :

A test specimen together with blue wool standards is exposed to the light from a MBTL fading lamp. The colour fastness of specimen is assessed by comparing its fastness with that of 1-8 Blue Wool standards.

EQUIPMENT :

The unit consists of a hollow cylinder of metal open at both ends with an internal dia of –18” & length of 18” A 500 W MBTL fading Lamp is mounted centrally so that the light distribution is constant around the circumference.An hour meter with buzzer and an hour totaliser are mounted on the base.  Four specimen holders are installed at equidistance in inner circumference of cylinder along with metal sheet mask to cover half of each test specimen & the standards. 

As temperature may touch upto 800 C constant cooling arrangement with water flow is provided.  A horizontal pump and water tank are included in scope of supply. 

MBTL LIGHT FASTNESS TESTER – Digital Model -Fixed Drum is used to determine the color fastness and degradation of textiles and dyed material against sunlight. This standard model comes with a 500 watt MBTL Fading lamp. 
Fixed Drum Type Comprising of : 
Specimen Holder – 4Nos. 
Test Tube Holders for Humidity Control – 50 Nos. 
Water Tank – 1No. 
Pump – 1No. 
Hour Meter with Buzzer – 1No. 
Voltage Stabilizer – 1No. 
Potassium Carbonate – 500gm (1 Box) Liquid Filler (Syringe) (There Is No Warranty On Mbtl Lamp)

PERSPIROMETER is used for determining the resistance of the color of textiles, fabric, yarn and garments to the action of human perspiration . 
Colour Fastness against Perspiration with weight for loading 21 acrylic plates and 100 Nos. adjacent fabric. 
Made of SS 136. (Fully SS) 
Weight: -2nos. 
Size of Specimen : 10cm x 4cm 
Force on Specimen : 5kg/4.53kg 
Size of acrylic plates. : 12.5cm x 6.5cm. (As per AATCC & ISO Standards)

SDC Blue Wool Standard 1 to 8 (Full Set)

VGOTECH SUBLIMATION TESTER – 3 POINT

Standards: ISO 105, BS 1006, AATCC 92,114,117,133, LCD Display of Temperature

Specifications:-

Ø  Test the Checking effect of dry heat on sublimation properties of dyestuff.

Ø  Fixed temperature of 150ºC, 180 ºC & 210 ºC on each pad or variable by + 30 ºC of the fixed temperature setting.

Ø  Number of heating station 3.

Ø  Number of pads 6, 2 for each stations with individual heating.

Ø  Size of each pad 40mm to 100mm.

Ø  Timer range 10 to 60 second. 

FEATURES

·         Tests the effect of dry heat for sublimation properties of dyestuff.

·         Temperature range: from 1300 C to 2500 C.

·         Number of heat pads: 13 each of 20 mm x 55 mm size.

·         Electronic proportional control with an accuracy of + 10C.

·         Electronic timer with a range of 10 to 60 seconds.

·         Automatic release of handle at the end of set – time.

Sublimation Tester is a suitable instrument for dyestuff manufacturers as will as textile processors for checking the effects of dry heat on dyestuff.  Sublimation fastness and staining effect properties of individual dyer can be tested at various temperatures.  In a single test, entire range of effective temperature can be tested.  The heating pads are made up of hard chromed electrolytic copper for even and quick distribution of heat LED indicators and fuses are provided for each pad.

The sample for testing is cut in 70 mm x 500 mm size and is sandwiched between while pieces of same material.  It is then spread on the heat pads and the handle is pressed down.  At the end of set time the handle is released automatically.  The results of sublimation fastness and staining of white fabrics are then checked & samples are graded accordingly.

VGOTECH  WASHING FASTNESS TESTER (Launderometer) – is used to wash the fabric sample for various tests for determining color Fastness.

Fully SS Structure comprising of rotor moving at 40 rpm in water tank
Heating load-2 x 1.5 KW or 3 x 2.0kw
Drive-1/4 HP 40rpm Geared motor coupled with rotor shaft
Beakers made from SS 316 ERW Pipe of 3mm thickness Rotor tank, top & frame made from SS 304.
Digital TIC & Timer in Panel for controlling heating cycle.
Safety Provision–Limit switch stops the machine as soon as the top lid is lifted.

STANDARD MODELS:

a) 8 x 550ml

b) 4 x 1200ml + 4 x 550ml

c) 8 x 1200ml + 8 x 550ml

The Washing Fastness Tester is used for determining colour fastness of textile materials to washings.  This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap – soda solution.  Before being rinsing and dried.  The change in colour of specimen and stains of the adjacent fabrics are assessed with standard Grey Scale.

The ‘VGOTECH’ Washing Fastness Tester Suppliers consists of a thermostatically controlled, electrically heated water bath made of Stainless Steel.  The bath is heated by means of immersion heaters and its temperature controlled by a capillary type thermostat.  The temperature of water inside the bath is displayed on a digital temperature indicator. The bath has a double walled hinged lid made of stainless steel sheets.

The jars in which the test solution and the test specimens are kept during the test are made from stainless steel and are provided with rubber scales for water tight closing. They are held in a cast aluminium rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating about a horizontal axis with the help of a geared Motor. A clockwork timer is provided to stop the motor after a pre-determined time. The apparatus is fabricated on a sturdy angle iron frame and is completely enclosed on all four sides with mild steel sheet duly enameled in metallic green paint. The top of the apparatus is covered with stainless steel sheet.

One hundred stainless steel balls of 6 mm diameter are supplied with the apparatus as standard accessory for providing beating action during the washing operation.  Extra stainless steel balls and standard Grey Scales are available as optional accessory.

Known for its exact design, fine quality and durability, our Infra Red Beaker Dyeing Machine is quite popular among the customers. As a leading Manufacturer, Exporter & Supplier, we keep our quality in synchronization with our reputation. It is procured from the reliable vendors who put quality on the top of their priority list. IR beaker dyeing machine is used by textile manufacturer as lab dyeing equipment for  sample/ matching dyeing of fabric, yarn, fibre & polyester, cotton sample dyeing etc

Specifications

• Size - 12 Pots x 250ml – Fully SS.
• Double Wall structure with insulation
• With Microprocessor based Temperature Programmer.  
• Air Cooling by using blower of 6” dia with speed 2800 rpm.
• Heating Load - 4.5kw
• Programmer - 97programs 20steps
• Rotor speed - 25rpm
• Temperature - 140oC
• Heating Rate - 4oC/min
• Cooling rate - 2oC/min
• Power - 3 phase neutral 415VAC, 50Hz.

Optional : Variable Speed Drive

We as a manufacturer, exporter & supplier of hthp beaker dyeing machine take pride in being the one stop destination in market. It is fit for use for various purposes across the industries. For our customers, we make high temperature high pressure beaker dyeing machine available in different sizes to match their demands. It is used by textile manufacturer as lab dyeing equipment for sample/ matching dyeing of polyester, fabric and yarn sample dyeing etc.  

Specifications

• Size - 12 pots x 250ml - fully ss.
• Double wall structure with insulation
• With microprocessor based temperature programmer.  
• Heating load - 3 x 2.0 kw - maximum rate of rise - 6oc/min.
• Drive - ¼hp 25 or 32 rpm geared motor coupled with rotor shaft.
• Forward / reverse movement of rotor thru timer.
• Beakers and rotor made from ss 316 & tank, frame and top made from ss 304. 
• Beakers made from 4 mm pipe to with stand pressure of 6 kg/cm 2.
• Cooling - through cold water inlet in copper coil
• Safety Rovision - limit switch will stop the machine if the top lid is lifted.
• Power - 440V, 3 Phase, Neutral, 50 Hz.

Description / Specification of Crock Meter

We are involved in offering a wide range of Crock Meter to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Crock Meter. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

 

As a renowned manufacturer, exporter & supplier of wrap reel testing machine, we bring you a wide range of immaculate quality. Our skilled professionals use only high-grade raw materials to ensure that our product meets the highest quality standards. It is used for making leas for strength testing and count testing of yarn. Wrap reel digital is the perfect solution for commercial application in various industries. The features such as longer service life and optimum performance make it an interesting proposition. 

Specifications

• Vgotech Wrap Reel – Manual (Imperial Or Metric Type) 
  • Swift of 1.5yard or 1.0meter circumference.
  • Creel for 10ends.
  • Traverse (spread) – 20mm.

• Vgotech Wrap Reel – Digital Motorised Model - The wrap reel is used for making leas for strength testing and count testing of yarn.
  • With electronic broke, pre  set  counter  &  creel  for  10 ends.
  • Swift of 1.5yard or 1.0 meter circumference.
  • Traverse (spread) – 20mm, speed - 125 - 150rpm.
  • As per is 1671-1977

With our expertise in the industry, we are engaged in offering the best range of Twist Tester. Being an excellent Manufacturer, Exporter & Supplier, we strive to live up to our reputation. It is cherished for its high performance. Its excellence is tallied to the quality as required by industrial standards. It is used for accurate measurement of twist per meter of the twisted yarn. The range includes Twist Tester Manual and Twist Tester Digital.

 

Specifications

• Vgotech Twist Tester – Manual (25-250mm)      
  • 5 Digit revolution counter, Load on test specimen-0-100gm

• Vgotech Twist Tester - MICRO – Controller Based Electronic Twist Tester, Model - “TT-MCT” (Fully Automatic Model) - is a Yarn Testing.
  • Equipments used for accurate measurement of TPM (Twist per meter) or TPI (Twist per inch) of the twisted yarn. The Equipment has facility of both untwist/twist methods for measurement of TPM of twisted yarn.

 

Features :

• Yarn Test Length 
  • 50mm to 500mm adjustable (metric unit) or 2” to 20” adjustable (imperial unit).
  • Test length adjustment by slider mechanism.

• Suitable for S/Z type of twisted yarns, multi as well as single filament yarns.

• Range - UP to 9999 TPM or 99.99 TPI
• Resolution - 1 TPM or 0.01 TPI
• Elongation Range - + 110mm or 4 inch with tolerance of -15mm or 0.6inch for  movement in other direction.

• Motor Speed    
  • up to 1500RPM adjustable.
  • Manual control of rotation is possible by hand.

• Clamps - Spring loaded clamps at both end of the instrument for easy clamping of yarn.

• Averaging  - Reading of twenty samples can be stored and average TPM/TPI value is calculated and displayed.

• Display - 16 digit backlit LCD display to display specified length, specimen No. mode of testing and TPM/TPI value.

• Electronic sensor for sensing zero (starting) position.

• Tension weight up to 100gms adjustable in step of 5gms.

• Supply - 230V AC, 30Watts.
• Size - 1000mm x 150mm x 200mm (approx.)

Calibration Certificate Provider of Our & Others All Indian Brand’s Textile Testing Instruments & Related.

 

 Vgotech is providing quality Calibration Certificate facility and repair services for Lab Textile Testing Equipments and related instruments. We hear to you & make every effort for providing  the best  services that you need to satisfy your business requirements.

 

Our Technicians & Service Engineers bring in the expert care & calibrate of all equipments according to International Standards.  Our Calibration Certificates issued by the Laboratory establishes traceability (by  NPL or NABL) to international or national standards.

 

SERVICES FEATURES:

 

·         Repair services & provide require spare parts.

·         Fast turnaround

·         Onsite calibration

·         Training and Workshops on calibration

·         Annual Maintenance and calibration contract.

·         Consultancy for new lab. Setup for textile testing equipments (dyeing, fastness, yarn, physical testing)

·         Providing new measuring & calibration equipments

·         Automatic recall when instruments are due for calibration. 

 

Vgotech India is constantly updating & expanding his capability by listening to your requirements.

We provide high quality state-of-the-art calibration alongwith documentation that satisfies your industry and regulatory requirement.

 

Vgotech calibration Certificate & stickers is complete your quality management system as well as also create trust & confidence in the mind of your customers & Accreditors.